Custom Wiring Harnesses

Eat Sleep DSM Performance makes custom DSM wiring harnesses using your wiring harness as a base. We can do several different things and build your harness exactly how you want it. If you are planning a wire tuck, a custom wiring harness is a must.

14375405_1379904118705663_1430446262_o

Every harness is different and built exactly for your needs and your setup. Everything that you have removed mechanically, air conditioning, power steering, emissions system, ABS, and all other deletes, will be implemented into your custom wiring harness. The same goes for relocations. Anything you have already relocated or are planning to relocate will be built into your wiring harness in order to run your wiring as cleanly as possible.

20151213_161803

Everything that you want done will determine the total cost. There are two harnesses that make up the complete wiring harness. Information about each harness is below.

ENGINE (ECU) HARNESS: $300 BASE PRICE

Restored wiring, reloomed with braided wire loom, new connectors/plugs as needed. New connectors will be added to the cost. The engine harness consists of all the essential connectors that plug into parts of the engine (injectors, coil pack, PTU, CAS, etc). This harness begins at the ECU plugs and ends at each individual plug that runs to various engine components.

  • Relocations- +$33 for any number of relocations.
    • Coil Pack
    • PTU
    • Injector Resistor Pack
    • Noise Condensers
    • Engine Speed Adjustment Connector
    • Ignition Timing Adjustment Connector
    • Fuel Pump Check Connector
  • Deletes- +$10 for any number of deletes.
    • AC
    • Power Steering
    • Emissions
    • EGR
    • FIAV
    • IAC
    • ABS
    • Boost Control Solenoid
    • Injector Resistor Pack
  • Add-Ons/Swaps- +$20 per add-on/swap.
    • 1G CAS
    • Speed Density Wiring/Plugs
    • MAF Swap
      • 1G MAF
      • 2G MAF
      • 3G MAF
      • Evo MAF
      • GM MAF
    • Aftermarket Cooling Fans
CHASSIS (FUSE BOX) HARNESS: $300 BASE PRICE

Restored wiring, reloomed with braided wire loom, new connectors/plugs as needed. New connectors will be added to the cost. The chassis harness consists of all the connectors that plug into the headlights, side marker lights, turn signals, etc. The harness runs from the in-cabin fuse box and ends at the engine bay fuse box.

  • Fuse Box Relocation- +$50
  • Deletes- +$10 for any number of deletes.
    • Windshield Wiper Motor
    • Fog Lights
    • Noise Condensers
  • Add-Ons- +$20 per add-on.

We tailor your custom harness for your exact setup. Every car and setup will be different based on the location of every part that the wiring harness plugs into. You will need to tell us exactly what your plan is when we do your harness. If you are interested in having Eat Sleep DSM Motorsports build your harness, please contact us at aj@eatsleepdsmmag.com or PM me on our site. Our harnesses generally take 2-3 weeks for completion.

Cars with Eat Sleep DSM Wiring Harnesses:

14407670_1379904188705656_788142983_n

20151222_161029

14429225_1379904088705666_937899810_n